Topic: treats order (Read 548 times)

Holmes · « **on:** September 02, 2010, 07:07:55 AM »

Imma order some treats here in a few days. Post up if you want/ need some parts thrown in too. I would hate to just get a gasket shipped here.

Crazy Harry · « **Reply #1 on:** September 02, 2010, 12:16:42 PM »

I need new bairing for my rear snowflake, a brake hub nut, and some side cover bolts for the free spirit

FakeDad · « **Reply #2 on:** September 02, 2010, 12:31:07 PM »

I could use some new bearings for my cup holder, a stack of coffee filters, a copy of Highlights for Children, and some organic cat food.

Holmes · « **Reply #3 on:** September 02, 2010, 01:52:50 PM »

I can rummage through my highlights stack and see what I can come up with.

Harry, post up links for the items you need please. I don't know nothing about these bikes unless it is a ciao or tomos engine.

FakeDad · « **Reply #4 on:** September 03, 2010, 02:47:37 PM »

Honestly could use a replacement bolt for holding my engine together, just went to every store in town, no m6 in the length I need.

Slink · « **Reply #5 on:** September 03, 2010, 02:49:54 PM »

You could buy m6 threaded rod, cut it size, and tighten it on with a bolt... That funky ass machine shop on the B.Loop by Carlitos sold me some m6 theaded rod stock once a long time ago...

Crazy Harry · « **Reply #6 on:** September 03, 2010, 04:17:12 PM »

Quote from: 24C on September 03, 2010, 02:49:54 PM

You could buy m6 threaded rod, cut it size, and tighten it on with a bolt... That funky ass machine shop on the B.Loop by Carlitos sold me some m6 theaded rod stock once a long time ago...

I'm good friends with elson (owner of said machine shop)

FakeDad · « **Reply #7 on:** September 03, 2010, 04:53:52 PM »

http://www.treatland.tv/honda-hobbit-camino-engine-studs-p/honda-hobbit-engine-studs.htm

Been everywhere in town today, rather get them while the treats train is rollin.

FakeDad · « **Reply #8 on:** September 03, 2010, 05:22:35 PM »

Quote from: 24C on September 03, 2010, 02:49:54 PM

You could buy m6 threaded rod, cut it size, and tighten it on with a bolt...

I just figured out how to insert a quote!

Yeah, westlakes had one that was almost the right length, was thinking of going that route, how much is this
Carlitos-way-m6-thread-peice?

FakeDad · « **Reply #9 on:** September 03, 2010, 05:28:30 PM »

yeah, called that machine shop (i think?) they don't haves. On the plus side, i'm the proud father of a bolt-extracting bit.

Holmes · « **Reply #10 on:** September 03, 2010, 09:08:50 PM »

Alright. Lets wrap it up by Monday or so, I will place the order.

If I leave town before it gets in, I can have my girl get the parts to you or at least on my porch.

FakeDad · « **Reply #11 on:** September 03, 2010, 09:26:35 PM »

Great.

Crazy Harry · « **Reply #12 on:** September 03, 2010, 11:41:37 PM »

here is what i need...
http://www.treatland.tv/loose-ball-bearings-p/loose-ball-bearings.htm

http://www.treatland.tv/moped-rear-axle-nut-12mm-p/moped-axle-nut-12-19.htm

http://www.treatland.tv/11mm-axle-nut-p/moped-axle-nut-11-19.htm

http://www.treatland.tv/puch-side-cover-bolt-p/puch-side-covers-bolt-short.htm x2

http://www.treatland.tv/puch-side-cover-bolt-p/puch-side-covers-bolt-long.htm x2

ben · « **Reply #13 on:** September 04, 2010, 02:47:13 PM »

Harrinator-
Most of that stuff you can just get at westlakes. Probably something to use for sidecover bolts too.

Crazy Harry · « **Reply #14 on:** September 04, 2010, 03:15:46 PM »

cheaper there too

Holmes · « **Reply #15 on:** September 15, 2010, 03:05:08 PM »

My apologies, I totally blanked on getting the order in. I ordered the 11mm axle nuts for you Harry, all the rest is totally westlakesable.

Should see this before mid next week. Leaves a bit of time before the rally to try and fix them headbolts Rob.

Lindar · « **Reply #16 on:** September 15, 2010, 03:29:53 PM »

They don't have M12 x 1 axle nuts at my Westlake....

Holmes · « **Reply #17 on:** September 15, 2010, 03:34:06 PM »

I can make thin nuts here, and they are common sizes for bicycles at least.

FakeDad · « **Reply #18 on:** September 15, 2010, 05:02:44 PM »

Boners, I'll probably Just try one of the wastlakes bolts I picked up, won't be quite long enough though. Think I'll need one them locking nuts.

Holmes · « **Reply #19 on:** September 17, 2010, 01:34:23 PM »

Treats are in! We can make another order if more stuff needs to be had. Just realized I probably should have gotten those loose ball bearings for you too Harry, but Walts also has quite a few available too.

Crazy Harry · « **Reply #20 on:** September 17, 2010, 03:29:43 PM »

Quote from: Holmes on September 17, 2010, 01:34:23 PM

Treats are in! We can make another order if more stuff needs to be had. Just realized I probably should have gotten those loose ball bearings for you too Harry, but Walts also has quite a few available too.

i was going there today anyway to pickup a cargo net

FakeDad · « **Reply #21 on:** September 17, 2010, 05:17:37 PM »

Just bought a lot of misc urbie bolts and such on eBay, so i got that figured out. Now I need a headlight........

FakeDad · « **Reply #22 on:** September 17, 2010, 05:56:54 PM »

Never mind, just eBay'd a light too, stock! Now this bike is finally starting to cost me some money...

Moped StL Forums

News:

Author Topic: treats order (Read 548 times)