Topic: finally got my parts ordered for my project bike (Read 519 times)

McGreggerson · « **on:** March 09, 2010, 11:40:03 PM »

finally got my parts ordered! and spring break is next week haha.

ordered the dmp teflon stuffed roller crank and the cdi unit from 1977mopeds

new shocks, gaskets, bearings, and some carb parts from treats.

so with the time ive got, and if i can get the bar mounted. i can get my bike painted, cured, shined and built in the next couple of weeks.

ire mark · « **Reply #1 on:** March 10, 2010, 02:28:53 AM »

is this for the za50 bike you got from rick?? you're gonna do bearings on that?? picts

McGreggerson · « **Reply #2 on:** March 10, 2010, 08:06:46 AM »

i dont have the ZA anymore, went back to e50. its off in KC now.

Sam · « **Reply #3 on:** March 10, 2010, 03:21:49 PM »

Build It Already

McGreggerson · « **Reply #4 on:** March 10, 2010, 05:20:27 PM »

hence the "finally"

Lindar · « **Reply #5 on:** March 10, 2010, 05:34:06 PM »

Eww, teflon stuffed? I hope you ordered some different shims too. Both of the ones I've installed plus most of the other people who I have heard talk about them have needed to re-shim.

McGreggerson · « **Reply #6 on:** March 10, 2010, 05:36:06 PM »

i can get shims, no issue there. of the ones in stock, it was that, or the DMP unstuffed with no oiler hole. or the metrakit crank that takes the funky bearing no one can find.

Mike Pee · « **Reply #7 on:** March 10, 2010, 07:15:02 PM »

McGreggerson · « **Reply #8 on:** March 10, 2010, 08:57:13 PM »

aaaannnnd i forgot to order engine studs.. and a top tank gas cap. and my order shipped. lmao oops

McGreggerson · « **Reply #9 on:** March 12, 2010, 11:08:57 PM »

got my cdi and crank from 77 mopeds, found a puch gasket set inside with it all. freebies are nice.

next coming is my treats order, gotta order some engine studs.. >.<

unless anyone has any?

Mike Pee · « **Reply #10 on:** March 12, 2010, 11:14:10 PM »

Woah. 77 gave something away?

77 has a happy customer?

WTF is this world coming to?

Lindar · « **Reply #11 on:** March 12, 2010, 11:22:59 PM »

Word of warning, if you get studs from treats, do NOT get the regular ones. They strip like crazy. I've stripped 7 of the 8 treats studs I've bought, and yes, I do use a torque wrench. I just bought some of the heat treated ones, and I'm hoping they work better, but I haven't had a chance to try them out yet.

McGreggerson · « **Reply #12 on:** March 12, 2010, 11:40:05 PM »

i know! last time i ordered anything from 77mopeds, it took forever and was the wrong part. and then took forever to get it fixed. this time it went easy-peasy and i got extra goodies that i actually needed haha

Sam · « **Reply #13 on:** March 13, 2010, 12:46:54 AM »

Less Type... More Build.......

McGreggerson · « **Reply #14 on:** March 13, 2010, 01:17:17 AM »

cleaned the case, and worked on the wheels and frame some more. wheels get painted tomorrow. may just leave the frame as is and just do low style racer maxi. debating. waiting on the rest of the engine parts from treats and then i can build it.